EuroRC T-shirt for one Euro! 1pcs/order.
Here you find our selection of parts for the Team Associated B44 series of cars.
Team Associated’s 4WD buggy, the B44 was released in 2007 as the Factory Team B44. After this initial release, the B44.1 Factory Team, B44.2 Factory Team, and the B44.3 Factory Team Kit all followed.
Browse this category to find the parts you need for your Team Associated RC10B44 car.
Here you can find the Team Associated B44 exploded views.
Here you can find the Team Associated B44.1 exploded views.
Here you can find the Team Associated B44.2 manual.
Here you can find the Team Associated B44.3 manual.
12mm Hex Mono 2.2 Rear Wheels (4) (B6.1/B64/XB2/XB4 etc.) (White)
JConcepts Inverse 2.2 Front Wheel (White) (4) (B44.1)
JConcepts Inverse 2.2 Front Wheel (Yellow) (4) (B44.1)
This is a pair of Velocity 2.2” 4WD Front Wheels for the Team Associated B44.1.
for TLR 22, B-Max, TeamC, RB5, B44.1/B44.2 and B4.1 Rear with 12mm hex.
for Tekno EB410, TLR 22, B-Max, TeamC, RB5, B44.1/B44.2 and B4.1 Rear with 12mm hex.
RPM Up-Travel Limiter Clips for Shocks (16)
Team Associated 12 × 31 Threaded Shock Bodies (2)
Team Associated 12mm Front Spring Black 3.00 lb (2)
This is a replacement Factory Team carbon fiber front top deck from Team Associated
Team Associated Ballstud, short black, .200”- Broached (6)
Team Associated Center Bearing Insert
Team Associated center brace and antenna mount
Associated complete bearing set for the Team Associated B44 series is constructed of stainless steel. Rubber sealed type.
This is a replacement CVA input shaft from Team Associated. This is the input shaft that the differential drive pinion gear mounts to.
This is a replacement Team Associated Factory Team “V2” 1/10 Shock Rebuild Kit. This kit includes all the parts needed to rebuild the seals on four Associated V2 shocks.
Team Associated Factory Team 12mm Piston,
Team Associated rear top deck
Team Associated Front Buggy Springs Short 3.20lb (Black) (2)
This is a replacement front bulkhead from Team Associated. This front bulkhead mounts to the main chassis, and provides mounting point for the front lower control arms.
Team Associated Front CVA Axle (B44) (2)
Team Associated Front Hinge Pin Brace
This is a pair of Velocity 2.2” 4WD Front Wheels for the Team Associated B44.1.
Team Associated 12 × 31 Threaded Shock Bodies (2)
Team Associated 12mm Front Spring Black 3.00 lb (2)
This is a replacement Factory Team carbon fiber front top deck from Team Associated
Team Associated Ballstud, short black, .200”- Broached (6)
Team Associated Center Bearing Insert
Team Associated center brace and antenna mount
Associated complete bearing set for the Team Associated B44 series is constructed of stainless steel. Rubber sealed type.
This is a replacement CVA input shaft from Team Associated. This is the input shaft that the differential drive pinion gear mounts to.
This is a replacement Team Associated Factory Team “V2” 1/10 Shock Rebuild Kit. This kit includes all the parts needed to rebuild the seals on four Associated V2 shocks.
Team Associated Factory Team 12mm Piston,
Team Associated rear top deck
Team Associated Front Buggy Springs Short 3.20lb (Black) (2)
This is a replacement front bulkhead from Team Associated. This front bulkhead mounts to the main chassis, and provides mounting point for the front lower control arms.
Team Associated Front CVA Axle (B44) (2)
Team Associated Front Hinge Pin Brace
Team Associated FT 12mm Pistons V2, 2 × 1.5, flat
12mm Hex Mono 2.2 Rear Wheels (4) (B6.1/B64/XB2/XB4 etc.) (White)
JConcepts Inverse 2.2 Front Wheel (White) (4) (B44.1)
JConcepts Inverse 2.2 Front Wheel (Yellow) (4) (B44.1)
for TLR 22, B-Max, TeamC, RB5, B44.1/B44.2 and B4.1 Rear with 12mm hex.
for Tekno EB410, TLR 22, B-Max, TeamC, RB5, B44.1/B44.2 and B4.1 Rear with 12mm hex.
Team Associated 12 × 31 Threaded Shock Bodies (2)
Team Associated 12mm Front Spring Black 3.00 lb (2)
This is a replacement Factory Team carbon fiber front top deck from Team Associated
Team Associated Ballstud, short black, .200”- Broached (6)
Team Associated Center Bearing Insert
Team Associated center brace and antenna mount
Associated complete bearing set for the Team Associated B44 series is constructed of stainless steel. Rubber sealed type.
This is a replacement CVA input shaft from Team Associated. This is the input shaft that the differential drive pinion gear mounts to.
Team Associated Factory Team 12mm Piston,
Team Associated rear top deck
Team Associated Front Buggy Springs Short 3.20lb (Black) (2)
Team Associated Front CVA Axle (B44) (2)
Team Associated Front Hinge Pin Brace
Team Associated FT 12mm Pistons V2, 2 × 1.5, flat
All products that are listed as in stock are in our own stock and ready to ship the next day. Exceptions to this are preorders and possible errors in logistics. All products include the finnish VAT (24%).We keep the right to change our prices.
All products are delivered by Itella (Finnish post), for EU orders priority shipments are used.
Shipping times:
Nordic countries 2–5 workdays,
Rest of EU 3–7 workdays,
We accept Paypal and finnish bank payments.
We are proud to have satisfied customers and accept returns of NEW and UNUSED items that are returned within 14days. Please be in contact with us through info@eurorc.com to recieve instructions.
When we recieve the product and it is in a reselable condition we will refund the money deducting all costs associated with the transaction.
Kaikki listaamamme tuotteet ovat omassa varastossamme ja ovat valmiita toimitukseen seuraavana arkipäivänä. Poikkuksena ainostaan ennakkotilaukset ja mahdolliset virheet logistiikassamme. Kaikki tuotteet sisältävät suomen arvonlisäveron (24%). Pidätämme oikeuden muuttaa hintojamme.
Kaikki tuotteet toimitetaan Itellan (Suomen posti) kautta.
Suomeen toimitusiaka on yleensä yksi arkipäivä, siitä että tuote on postitettu.
Pohjoismaihin 2-5 työpäivää ja muihin EU-maihin 3-7 työpäivää.
Hyväksymme suomalaiset maksutavat ja Paypalin.
Olemme ylpeitä tyytyväisistä asiakkaista ja hyväksymme palautukset UUSILLE ja KÄYTTÄMÄTTÖMILLE tuotteille, jotka ovat palautettu 14-päivän sisällä. Jos haluat palauttaa tuotteen ota yhteyttä meihin info@eurorc.com -osoitteeseen saadaksesi tarkemmat ohjeet.
Kun vastaanotamme tuotteen ja tarkistamme sen jälleenmyyntikunnon palautamme rahat tilillesi.