Redox Dynamic 8 ( with RDX.8) MODE 2 Transmitter with Receiver RDX-TD8.M2

The transmitter has 6 proportional functions (sticks + 2 potentiometers) plus 4 additional switches (3 two-position and 1 three-position).

The rod system of the Dynamic 8 apparatus classifies it primarily as a transmitter intended for operating flying models (airplanes, helicopters, drones), however, the apparatus can also be successfully used for models moving on the water (boats, motorboats, yachts) and on paved surfaces ( cars).

The transmission range of the transmitter signal, depending on the receiver used, may be from about 800 to 1500 meters (in optimal conditions and undisturbed working environment). 
Characteristics of the Redox Dynamic 8 transmitter:

• Number of channels: 8x PWM + 1x SBUS
• Supported model types: Airplanes, UAVs, Helicopters, Cars, Boats
• Frequency / Modulation: 2.4 GHz S-FHSS, FSK
• Resolution: (1024 p.)
• Working voltage: 4.8 - 6 V
• Current consumption (own): ~ 150 mA
• Weight: 460 g (approx. 553 g with batteries)
• Power supply: 4x AA NiMH rechargeable battery or 4x LR6 alkaline batteries
• Low voltage alarm: Yes

Receiver included: Redox RDX. 8

• Number of channels: 8x PWM + 1x SBUS
• Frequency / Modulation: 2.4 GHz S-FHSS, FSK
• Working voltage: 3.5 - 7.4 V (max. 2s LiPo)
• Compatible with HV servos: Yes
• Weight: 12 g
• Sizes: 42 x 28 x 12 mm
• Antenna length: 150 mm

You need to Changing the Modulation (signal mode) 1 into 2 for some receivers
Switch ON the transmitter, and immediately after switchin on, switch fast the "SW4" switch up/down repeatedly several times, until it changes the light from green to blue (signal led)

Dynamic 8 works with:
Type of receiver
rdx.6 - yes, "green" mode
rdx.7 - yes, "green" mode
rdx.6G - yes, "green" mode
rdx.8L - yes, "green" mode
rdx.7L - yes, "green" mode
rdx.7G - yes, "blue" mode
rdx.8 - yes, "blue" mode

LINK TO MANUAL HERE