Tamiya 1:10 Toyota GR 86 (TT-02) - KIT TAM-58694-60A

A Mouthwatering Prospect

This Tamiya R/C kit recreates the Toyota GR 86 as a 1/10 R/C product. The Toyota GR 86 is a lightweight front- engine, rear-wheel-drive sports car which was announced in April 2021. It has a broad stance, low center of gravity, and employs aerodynamic components rooted in motorsports. The aluminum engine hood, roof and front fenders are lightweight and the suspension features front strut and rear double wishbone systems. This car is powered by a 2.4-liter horizontally opposed four-cylinder DOHC engine capable of 235hp.

• Headlight cases are separate polycarbonate parts, and give a super realistic look with stickers applied.
• The air intakes which sandwich the front bumper on either side are also depicted with authenticity by stickers
• The Functional Matrix Grille is also depicted using a sticker; the license plate is cut out of polycarbonate.
• The duckbill trunk lid is an eye-catcher. Rear combination lamps are separate polycarbonate parts.
  

TT-02: Adaptable, balanced shaft driven 4WD

The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Gun metal color 10-spoke wheels and slick tires make for a racy finish.

Specifications:

• Length: 428mm
• Width: 188mm
• Height: 131mm 
• Wheelbase: 257mm 
• Tire Width/Diameter (Front and Rear): 27/67mm 
• Bathtub-type Frame 
• Shaft Driven 4WD 
• Front/Rear 4-Bevel Resin Differentials 
• 3-Piece Steering Tie-Rod 
• 4-Wheel Double Wishbone Suspension 
• Front/Rear Friction Dampers 
• Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion) 
• Type 540 Motor (brushed)
• Includes ESC

Required Items:

• Electronic Speed Control for brushed motors (Find ESC here)
• 2-Channel radio with receiver (Find Radios here)
• Steering servo: Halko Turner 1.0 WP (More Servos here)
• 7.2volt battery pack: Nimh pack with Tamiya connector
• Compatible charger (Find Chargers here)
• Paint for the body