How To - RC Stunt Ramp

Yo we heard you like bashing so here is a sweet project for ya! Follow along and craft your own RC Stunt Ramp and make it wild!

Here is what you need:

RC STUNT RAMP PARTS LIST

• Side panels: 6mm weatherboard / plywood, 960 x 900mm
• Ramp Surface: 4mm plywood, 1000x1010mm
• Lower Support Beams: 2x4" beam, 1000mm, 1x 1x4" wood panel, 1000mm.
• Support beams for ramp surface: 5x 1x2" bars, 1000mm
• Long wood screws
• Short wood screws

Basic Structure of our RC Stunt Ramp. Make it smaller or bigger or anything you want!

Instructions:

1. First cut the 6mm board in two same size triangles
2. Then cut the triangles together for wanted shape. Dont make it too tight, try to make the throw your car up and forward
3. Screw the lower support beams in. You can use 2x4" or just anything sturdy enough!
4. Screw the ramp surface supports to the side panels
5. Install the 4mm plywood (1000x1000mm) and screw it tight
6. ?????
7. Bash until your car is a wreckage and get spare parts from our shop!!

Check out the video how it was done!

Remember to share your ramp at our Instagram! Have fun bashing!